|
Operation
Solid construction with small bore vacuum system gives smooth, fast and
reliable operation on a wide variety of sack materials. A sack is lifted
from the pile by a suction arm, ready for opening. A second suction arm
then moves up and the bag is opened, allowing the swing arm blades to
enter and grip the bag. The swing arms then rotate up to the sack clamp.
Control System
The C-Series control system utilises the latest PLC technology. The
controls are very simple, comprising of a pause/run switch, clamp
release switch, clamp timer dial, step function switch, E-stop button
and posser on/off switch. Additional controls can be added if required.
Packing Speeds
Packing speeds depend on many factors such as weigher speed, filling
time, conveyor speed etc. Typical speed for the C-Series is 600 sacks
per hour or 10 bags per minute. However speeds of 720 bags per hour or
12 bags per minute are possible.
Weigher Requirements
Works with almost any fully automatic net or gross weigher or volumetric
filler.
|
|
Sack Specification
Most commercial quality paper, plastic, WPP and laminated sacks are
acceptable, providing they are in good condition and stack neatly.
Multiwall paper sacks must be pasted between layers. Plastic sacks must
be between 100 and 200 Micron. (400-800 Gauge), must be dry and free
from static. WPP sacks must have a tight weave to allow the vacuum
system to work. They must be flat and not cut with a hot knife.
Unsuitable sacks such as Hessian and Nets can be placed manually via a
supplied foot pedal.
Minimum sack size – 200mm x 350mm
Maximum sack size – 600mm x 1,000mm
Electrical Requirements
Standard: 240V, 50/60 Hertz 1 Phase, 6 Amp Supply. Alternatives can be
accommodated.
Air Requirements
Cool, clean, dry air at 6 bar (90 PSI) at 27Litres (1 CuFt) per cycle.
I.e. 12 cfm at 12 sacks/min 20mm (3/4”) supply pipe minimum.
Shipping Specification
Case Size (mm); 1,200 x 1,000 x 1,400mm high. Gross Weight; 175 Kg. |
