Operation
Floor or Conveyor mounted robust steel frames that are available with or
without height adjustment, supporting a modern stitcher, heat sealer or
presenter. Pacepacker Services normally supply Fischbein or Newlong
Sewing Heads and Fischbein Saxon or OK Heat Sealers, although we have
worked with many others besides. Units can be incorporated into your
existing Pacepacker system or as a stand-alone unit to position over a
conveyor.
Control System
Stand-alone systems are supplied with a control panel containing a PLC
which links to an infeed sensor to control start/stop times. Fischbein
Saxon and OK Heat Sealers are supplied with a bare lead for connecting
to your own supply and are available in 3 Phase or Single Phase.
Conveyors & Packing Speeds
Systems work with almost any leg mounted conveyor and sealing speeds are
matched as required or can be adjustable via Inverters.
Sack Specification
Most commercial quality paper, plastic, WPP and laminated sacks are
acceptable, providing they are in good condition and are presented
neatly. Multiwall paper sacks must be pasted between layers. Plastic
sacks must be between 100 and 200 Micron. (400-800 Gauge), must be dry
and free from static.
Electrical Requirements
Standard: 415V, 50/60 Hertz 3 Phase, 5 Amp Supply for stitcher.
Standard: 415V or 240V 50/60 Hertz 3 Phase, 10 Amp Supply for Heat
Sealer. Alternatives can be accommodated.
Air Requirements
Cool, clean, dry air at 6 bar (90 PSI) at 27Litres (0.5 CuFt) per cycle.
I.e. 12 cfm at 12 sacks/min 20mm (3/4”) supply pipe minimum.
